Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-911 — Xerox WorkCentre 5335

Code: 024-911

Description: Tray 2 Size Mismatch RAP Operation Error. Size Mismatch Tray 2: Measured Length Mismatch. When the paper slow scan direction length is measured on the paper path, the length is different from the slow scan length for the size detected by the tray.
Remedy: • Load the correct paper in the tray. If the problem persists, check the sensor using the Generic Sensor Failure RAP. • Ensure that the customer is programming a job within the parameters of the machine utilizing the UI. • The Tray 2 Paper Size Switch for failure: Analog Monitor [072-200];Component Control [072-104] (PL 9.1) • The connection between the Tray 2 Paper Size Sensor P/J123 and the MCU PWB P/ J414 for open circuit, short circuit, and poor contact • Disconnect then reconnect the IIT, Control Panel, ESS, MCU all PWBs connected to them (RAM, Firmware module, EEPROM) • Check the sw version of the controller sw - update if required (GP 16) • Replace MCU PWB (PL 18.2) • Replace ESS PWB (PL 35.2) (If not fixed by this, reinstall the original ESS & MCU)

← Xem tất cả mã lỗi Xerox WorkCentre 5335

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie