Code: 077-101
Description: Registration Sensor Off Jam RAP The Registration Sensor does not turn OFF within the specified time after the Registration Clutch On.
Remedy: Check the following: • A paper transportation failure due to a foreign substance/burr on the paper path • Each Takeaway Roll and Pinch Roll for contamination, wear, and revolution failure • The Registration Roll and Pinch Roll for contamination, wear, and revolution failure • Each Exit Roll and Pinch Roll for contamination, wear, and revolution failure • Each Takeaway Roll Drive Gear for wear and damage • The Registration Roll Drive Gear for wear and damage • The BTR for contamination, wear, and revolution failure • The Fuser Drive Gear for wear and damage • Each Exit Roll Drive Gear for wear and damage • Use of paper out of spec • The Registration Sensor for contamination, improper installation, and Actuator operation failure
Check the following: • The Registration Sensor for failure: Component Control [077-104] (PL 15.1) • The Registration Clutch for failure: Component Control [077-002] (PL 15.1) • The Main Drive Motor for revolution failure: Component Control [042-003] CW (PL 3.2) • The Takeaway Clutch for failure: Component Control [077-001] (PL 15.1) • The Registration Transport Assy (PL 15.1) for installation failure Reload the machine software (GP 16). If no problems are found, replace the MCU PWB (PL 18.2).
Check the following: • The Registration Sensor for failure: Component Control [077-104] (PL 15.1) • The Registration Clutch for failure: Component Control [077-002] (PL 15.1) • The Main Drive Motor for revolution failure: Component Control [042-003] CW (PL 3.2) • The Takeaway Clutch for failure: Component Control [077-001] (PL 15.1) • The Registration Transport Assy (PL 15.1) for installation failure Reload the machine software (GP 16). If no problems are found, replace the MCU PWB (PL 18.2).