Code: 077-103
Description: Exit Sensor 1 Off Jam RAP After the Fuser Exit Sensor turned ON, the Fuser Exit Sensor did not turn OFF within the specified time
Remedy: Check the following: • A paper transportation failure due to a foreign substance/burr on the paper path • The Fuser for wound up, stuck paper • The Fuser Exit Sensor for contamination, improper installation, and Actuator operation failure • Each Exit Roll and Pinch Roll for contamination, wear, and revolution failure • Each Exit Roll Drive Gear for wear and damage • The Exit 1 Gate for operation failure • Use of paper out of spec
Check the following: • The Fuser Exit Sensor for failure: Component Control [077-101] (PL 7.1) • The Exit 2 Motor for revolution failure: Component Control [077-015] (PL 17.5) • The Exit Gate Solenoid for failure: Component Control [077-004] (PL 17.5) Reload the machine software (GP 16). If no problems are found, replace the MCU PWB (PL 18.2).
Check the following: • The Fuser Exit Sensor for failure: Component Control [077-101] (PL 7.1) • The Exit 2 Motor for revolution failure: Component Control [077-015] (PL 17.5) • The Exit Gate Solenoid for failure: Component Control [077-004] (PL 17.5) Reload the machine software (GP 16). If no problems are found, replace the MCU PWB (PL 18.2).