Code: 077-106
Description: Exit Sensor 1 On Jam RAP The Fuser Exit Sensor does not turn ON within the specified time after the Registration Clutch On.
Remedy: Check the following: • The Fuser Exit Sensor for failure: Component Control [077-101] (PL 7.1) • A paper transportation failure due to a foreign substance/burr on the paper path • The Fuser Exit Sensor for contamination, improper installation, and Actuator operation failure • Each Takeaway Roll and Pinch Roll for contamination, wear, and revolution failure • The Registration Roll and Pinch Roll for contamination, wear, and revolution failure • The BTR for contamination, wear, and revolution failure • The Fuser for wound up, stuck paper • The Fuser Drive Gear for wear and damage • Use of paper out of spec Reload the machine software (GP 16). If no problems are found, replace the MCU PWB (PL 18.2).