Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 03-415 — Xerox WorkCentre 5632

Code: 03-415

Description: Tray 5 Module Not Detected / Confirmed RAP 03-415 The IOT PWB has not detected the tray 5 module at startup, or has failed to detect the tray 5 module during printing.
Remedy: Switch off the machine, GP 14. Go to Flag 1. Check that there is continuity between P/J12, pins 3 and 4. There is continuity. Y↓N→Perform the following: • Check the wiring between P/J12 and P/J501. Repair the wiring as necessary, GP 7. • Check the wiring between P/J501and P/J512 on the Tray 5 control PWB. Repair the wiring as necessary, GP 7. • Check the condition of P/J501, paying attention to the condition of the pins. Repair the wiring as necessary, GP 7. • Check the loop between pins 19 and 20 on P/J501. Repair the wiring as necessary, GP 7. Switch on the machine, GP 14. With P/J501 disconnected, check for +3.3V at P/J12, pin 3. Check for 0V at P/J12, pin 4. As necessary, perform the following: • Go to 01D +3.3V Distribution RAP. • Go to 01B 0V Distribution RAP. • Perform OF7 IOT PWB Diagnostics RAP before installing a new IOT PWB, PL 1.10 Item 2.

← Xem tất cả mã lỗi Xerox WorkCentre 5632

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie