Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-007-170, 11-008-170, 11-312-170, 11-313-170 — Xerox WorkCentre 5632

Code: 11-007-170, 11-008-170, 11-312-170, 11-313-170

Description: Compiler Carriage Rear Tamper Move Failure RAP 11-007-170 The compiler carriage rear tamper fails to move to the front position. 11-008-170 The compiler carriage rear tamper fails to move to the rear position 11-312-170 The compiler carriage rear tamper is not at the front home position. 11-313-170 The compiler carriage rear tamper is not at the rear home position
Remedy: NOTE: All HCSS BM interlocks must be made to supply +24V to the motors. Enter dC330, codes 11-006 tamper motor rear move, then 11-004 tamper motor rear home. The rear tamper moves between the inboard and home positions. Y↓N→Go to Flag 2. Check the motor, MOT11-004. Refer to: • GP 10, How to Check a Motor. • P/J402, Carriage PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • Carriage PWB, PL 11.72 Item 5. • Rear tamper motor, PL 11.72 Item 10. Enter dC330, code 11-311, actuate the front tamper home sensor by using the stacked codes, 11-004 and 11-006 to move the tamper. Observe the display. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-311. Refer to: • GP 11 How to Check a Sensor. • P/J407, Carriage PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • Carriage PWB, PL 11.72 Item 5. • Compiler carriage assembly, PL 11.72 Item 1 Go to Flag 3. Check the connectors and harness between P/J412 and P/J432. Also check connectors and harness P/J401 and P/J428, refer to GP 7. The wiring and connectors are good. Y↓N→Repair the wiring, or install new components as necessary.

← Xem tất cả mã lỗi Xerox WorkCentre 5632

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie