Description: Bin 2 Movement Failure RAP 11-036-130 Bin 2 fails to move. 11-346-130 Bin 2 is not at the home position. NOTE: The home position is at the uppermost position.
Remedy: NOTE: All HCSS interlocks must be made to supply +24V to the motors. Enter dC330, codes 11-038, bin 2 elevator motor down to run the bin 2 elevator motor, MOT11- 036. MOT11-036 runs. Y↓N→Go to Flag 2. Check MOT11-036. Refer to: • GP 10, How to Check a Motor. • P/J431, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Bin 2 elevator motor, PL 11.54 Item 11. • HCSS PWB, PL 11.56 Item 5. Enter dC330, codes 11-038 bin 2 elevator motor down, then 11-036 bin 2 elevator motor home. Bin 2 moves away from, then back to, the home position. Y↓N→Check the bin 2 front and rear elevator belts: • Ensure that both belts are correctly positioned on the upper and lower pulleys. • Ensure that bin 2 is securely clamped to both elevator belts. Enter dC330, code 11-344. Actuate the bin 2 upper limit switch, S11-344. The display changes. Y↓N→Go to Flag 3. Check the switch S11-344. Refer to: • GP 13, How to Check a Switch. • P/J431, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary. • Bin 2 upper limit switch, PL 11.54 Item 1. • HCSS PWB, PL 11.56 Item 5. Enter dC330, code 11-345. Actuate the bin 2 lower limit switch, S11-454. The display changes. Y↓N→Go to Flag 4. Check the switch S11-345. Refer to: • GP 13, How to Check a Switch. • P/J431, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary. • Bin 2 lower limit switch, PL 11.54 Item 2. • HCSS PWB, PL 11.56 Item 5. Enter dC330, code 11-346. Actuate the bin 2 empty sensor, S11-041. The display changes. Y↓N→Go to Flag 1. Check the sensor S11-041. Refer to: • GP 13, How to Check a Sensor. • P/J418, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Bin 2 empty sensor, PL 11.54 Item 5. • HCSS PWB, PL 11.56 Item 5. Perform SCP 6 Final Actions.