Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-062-170 — Xerox WorkCentre 5632

Code: 11-062-170

Description: HCSS BM Crease Roll Failure RAP 11-062-170 The HCSS BM crease roll motor failed to run.
Remedy: Release the crease roll nip pressure by moving the crease roll handle, PL 11.80 Item 5, fully counter clockwise. Remove the BM right hand cover, PL 11.88 Item 15, to access the crease rolls. Enter dC330 code 11-419. Actuate the BM crease roll motor encoder sensor by rotating the crease rolls slowly by hand. The display changes. Y↓N→Go to Flag 1, check the BM crease roll motor encoder sensor, Q11-419. Refer to: • GP 11, How to Check a Sensor. • P/J552, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM PWB, PL 11.86 Item 10. • BM crease roll motor encoder sensor, PL 11.86 Item 9. Enter dC330, code 11-062 to run the BM crease roll motor, MOT 11-062. The motor runs. Y↓N→Go to Flag 2, check the BM crease roll motor, MOT 11-062. Refer to: • GP 10 How to Check a Motor. • P/J557, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM crease roll motor, PL 11.86 Item 12. • BM PWB, PL 11.86 Item 10. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • BM crease roll motor encoder sensor, PL 11.86 Item 9. • BM crease roll motor, PL 11.86 Item 12.

← Xem tất cả mã lỗi Xerox WorkCentre 5632

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie