Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-403-170, 11-413-170 — Xerox WorkCentre 5632

Code: 11-403-170, 11-413-170

Description: HCSS BM Staple Unit 2 Failure RAP 11-403-170 The HCSS BM staple unit 2 fails to move. 11-413-170 The HCSS BM staple unit 2 is not at the home position
Remedy: Enter dC330, code 11-421 to check the BM staple head carrier closed sensor, Q11-421. Open and close the staple head carrier. The display changes. Y↓N→Go to Flag 1, check the staple head carrier closed sensor, Q11-421. Refer to: • GP 11, How to Check a Sensor. • P/J552, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM staple head carrier closed sensor, PL 11.88 Item 18. • BM PWB, PL 11.86 Item 10. Enter dC330, code 11-403 to run the BM SH2 motor, stack the code 11-413 to check the BM SH2 home switch. The display changes. Y↓N→The staple head cycled when the first code was entered. Y↓N→Go to Flag 3 and check the wiring and connectors between P/J560 and PJ586. The wiring and connectors are good. Y↓N→Repair the wiring or connectors. Install a new BM staple head 2, PL 11.88 Item 7. Go to Flag 2, check the BM SH2 home switch, S11-413. Refer to: • GP 13, How to Check a Switch. • P/J551, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM staple head 2, PL 11.88 Item 7. • BM PWB, PL 11.86 Item 10. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • BM staple head carrier closed sensor, PL 11.88 Item 18. • BM staple head 2, PL 11.88 Item 7. • BM PWB, PL 11.86 Item 10.

← Xem tất cả mã lỗi Xerox WorkCentre 5632

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie