Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-473-171 ... 11-478-171 — Xerox WorkCentre 5645

Code: 11-473-171 ... 11-478-171

Description: Support Finger Position RAP 11-473-171 The support finger has failed to return to the initial position. 11-474-171 The support finger has failed to move from the initial position. 11-475-171 The support finger has failed to return to the home position. 11-476-171 The support finger has failed to move from the home position. 11-477-171 The support finger has failed to return to the out position. 11-478-171 The support finger has failed to move from the out position.
Remedy: NOTE: When extending the fingers manually, to check the sensors, the home sensor operates first, followed by the init sensor. The away sensor operates when the fingers are fully extended. shows the component locations. Enter dC330 code 11-192, support finger home sensor. Note the position of the support fingers at rest. Using a screwdriver, or with a finger, turn the gear wheel shown, downwards. The support fingers extend to the right as the gear is turned. When the support fingers have extended by about six millimetres, the support finger home sensor changes state. The display changes from High to Low. Y↓N→Go to Flag 1 and check the support finger home sensor, Q11-192. Refer to: • GP 11 How to Check a Sensor. • P/J402, HVF control PWB. • 11A-171, HVF Power Distribution RAP. Install new components as necessary: • Support finger home sensor, Q11-192, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Enter the dC330 code 11-191 and continue turning the gear wheel. When the support fingers have extended by about 25 mm, the support finger init sensor changes state. The display changes from High to Low. Y↓N→Go to Flag 2 and check the support finger init sensor, Q11-191. Refer to: • GP 11 How to Check a Sensor. • P/J402, HVF control PWB. • 11A-171, HVF Power Distribution RAP. Install new components as necessary: • Support finger init sensor, Q11-191, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Enter the dC330 code 11-193, support finger out sensor, Q11-193 and continue turning the gear wheel. When the support fingers have extended by about 105 mm, the support finger out sensor changes state. The display changes from High to Low. Y↓N→Go to Flag 3 and check the support finger out sensor, Q11-193. Refer to: • GP 11 How to Check a Sensor. • P/J402, HVF control PWB. • 11A-171, HVF Power Distribution RAP. Install new components as necessary: • Support finger out sensor, Q11-193, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Make several small sets of prints and observe that the support fingers are extended between each set. The support fingers are extended. Y↓N→Remove the HVF top cover and rear cover-171. Enter the dC330 code 11-172, support finger motor encoder.. Manually turn the support motor encoder disc. The encoder sensor changes state. Y↓N→Go to Flag 4 and check the support finger motor encoder sensor, Q11-172. Refer to: • GP 11 How to Check a Sensor. • P/J402, HVF control PWB. • 11A-171, HVF Power Distribution RAP. Install new components as necessary: • Support finger motor encoder sensor, Q11-172, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Go to Flag 5 and check the wiring and repair as necessary. Install new components as necessary: • Support finger motor, PL 11.140 Item 9. • HVF control PWB, PL 11.157 Item 2. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5645

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie