Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 09-345, 09-346 — Xerox WorkCentre 5655

Code: 09-345, 09-346

Description: Transfer / Detack Cleaning Failure RAP 09-345 The transfer / detack cleaning routine has failed to complete. The home sensor is not detected. 09-346 A transfer / detack cleaning warning detected. Home sensor detected, but may not be cleaning the full length of the wires
Remedy: NOTE: The front door interlock must be cheated when checking +24V components. Enter dC330 code 09-074 transfer / detack stall sensor. Press Start. Enter dC330 code 09-075 transfer / detack cleaner motor. Press Start. When the motor reaches the end of its travel, the stall sensor will go high / low. The motor runs and the stall sensor goes high / low. Y↓N→Go to Flag 2. Check MOT09-043. Refer to: • GP 10 How to Check a motor. • P/J65, IOT PWB. • 01G +24V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • Transfer / detack motor (45-87 ppm), part of PL 10.25 Item 1. • Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. Remove the transfer / detack corotron. Enter dC330 code 09-073 transfer / detack cleaner home sensor. Press Start. Manually actuate the sensor The display changes. Y↓N→Go to Flag 1. Check Q09-070. Refer to: • GP 11 How to Check a Sensor. • P/J65, IOT PWB. • 01D +3.3V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • Transfer / detack cleaner home sensor, (45-87 ppm), part of PL 10.25 Item 1 • Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. The fault can be intermittent, perform the following: • Check the wiring, GP 7. Repair if necessary. • Check for binding of the transfer / detack cleaner as it moves up and down the corotron shield. part of PL 10.25 Item 1. • Ensure that P/J65 on the IOT PWB is connected correctly. • Check for toner contamination on the front end of the short paper path. With the corotron removed, clean the contaminated area. Remove and clean the transfer / detack cleaner home sensor.

← Xem tất cả mã lỗi Xerox WorkCentre 5655

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie