Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-053-110, 11-370-110 — Xerox WorkCentre 5655

Code: 11-053-110, 11-370-110

Description: Staple Head Unit Movement Failure RAP 11-053-110 The staple head unit fails to move. 11-370-110 The staple head unit is not at the home position. NOTE: The home position is when the staple head unit is at the corner stapling position (fully to the front of the 2K LCSS and rotated through 45 degrees).
Remedy: • Check the 2K LCSS PWB DIP switch settings, refer to 11F-110 2K LCSS PWB DIP Switch Settings RAP. • Un-dock the 2K LCSS from the machine-110, move the ejector assembly fully to the right, manually move the stapler unit along the full length of the track using the green thumb-wheel. Check the home sensor flag and the two dual position flags for damage, see NOTE. Check for damage or obstructions that would prevent the stapling unit from moving. If necessary, install a new staple head unit, PL 11.20 Item 5 or a new stapler traverse assembly, PL 11.20 Item 1. NOTE: For dual position stapling, the SU1 front index sensor uses two flags. • Dock the 2K LCSS to the machine.
NOTE: All 2K LCSS interlocks must be made to supply +24V to the motors. NOTE: In diagnostics, actuating any 2K LCSS sensor or switch can change the displayed state on the UI. Make sure that the correct sensor or switch is tested. Enter dC330, code 11-021 to move the ejector assembly fully to the right. Enter code 11-055. The stapling unit cycles back and forth along the track. Y↓N→Go to Flag 3 and check MOT11-053. Refer to: • 11G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. •. • P/J308, 2K LCSS PWB. • 11D-110. 2K LCSS Power Distribution RAP. Repair or install new components as necessary: • Stapler traverse assembly, PL 11.20 Item 1. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330, code 11-370. Actuate the SU1 home sensor, Q11-370, by moving the stapler unit to and from the home position using the green thumb-wheel. The display changes. Y↓N→Go to Flag 1 and check Q11-370. Refer to: • 11G-110 2K LCSS PWB Damage RAP. • GP 11. How to check a sensor. •. • P/J308, 2K LCSS PWB. • 11D-110 2K LCSS Power Distribution RAP. Repair or install new components as necessary: • SU1 home sensor, PL 11.20 Item 3. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330, code 11-021 to move the ejector assembly fully to the right. Enter code 11-371. Actuate the SU1 front index sensor, Q11-371, by moving the stapler unit to and from the flag position (approximately 115mm (4.5 inches) from the front of the track) using the green thumbwheel. The display changes. Y↓N→Go to Flag 2 and check Q11-371. Refer to: • 11G-110 2K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. • P/J308, 2K LCSS PWB. • 11D-110 2K LCSS Power Distribution RAP. Repair or install new components as necessary: • SU1 front index sensor, PL 11.20 Item 3. • 2K LCSS PWB, PL 11.26 Item 1. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5655

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie