Code: 03060A00-2E1B
Description: Roll media end error. During printing or roll media feed, the media sensor detected the end of the roll media.
Causes: Roll media, roll media sensor, roll feed unit PCB, or main controller PCB.
Remedy: 1. Roll media If roll media is used up, load new roll media. 2. Roll media sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the media sensor. 3. Cable continuity check If continuity of the cable between the roll media sensor and the roll feed unit PCB is abnormal, replace the cable. 4. Replace the roll feed unit PCB. 5. Cable continuit check If continuity of the cable between the roll feed unit PCB and the main controller PCB is abnormal, replace the cable. 6. Replace the main controller PCB.