Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-391-170 — Xerox WorkCentre 5655

Code: 11-391-170

Description: HCSS BM Flapper Failure RAP 11-391-170 The HCSS BM flapper is not at the home position.
Remedy: NOTE: All HCSS BM interlocks must be made to supply +24V to the motors. Remove 4 screws from the BM flapper assembly, PL 11.80 Item 30. Rest the BM flapper assembly on the crease blade. Do not disconnect PJ565 or PJ587. Enter dC330, code 11-390 to check the BM flapper motor, MOT11-390. The BM flapper rotates. Y↓N→Go to Flag 2. Check MOT11-390. Refer to: • GP 10, How to Check a Motor. • P/J555, BM PWB. • 11C-170, HCSS BM Power Distribution RAP. Install new components as necessary: • BM flapper motor, PL 11.80 Item 28. • HCSS BM PWB, PL 11.92 Item 5. • BM flapper, PL 11.80 Item 23. Enter dC330, code 11-391. Actuate the flapper home sensor, Q11-391. The display changes. Y↓N→Go to Flag 1. Check Q11-391. Refer to: • GP 11 How to Check a Sensor. • P/J551, BM PWB. • 11C-170, HCSS BM Power Distribution RAP. Install new components as necessary: • Flapper home sensor, PL 11.80 Item 12. • HCSS BM PWB, PL 11.92 Item 5. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5655

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie