Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11A-110 — Xerox WorkCentre 5655

Code: 11A-110

Description: Offline Stapling Fault RAP Use this RAP when offline stapling fails to operate. NOTE: Due to customer difficulty with the offline stapler feature, the feature is no longer promoted. The button has had the staple symbol removed. Also the label that used to be on the front, showing how to put sets in for stapling has been removed. However a customer who knows about this feature may still use it. The functionality is still present to allow the customer to lower bin 1 to remove documents.
Remedy: NOTE: In diagnostics, actuating any 2K LCSS sensor or switch can change the displayed state on the UI. Make sure that the correct sensor or switch is tested. Enter dC330, code 11-374 to illuminate the offline staple LED. The LED is illuminated. Y↓N→Go to Flag 4, disconnect P/J312. +2V is available at P/J312 between pins B10 and B12 when the code is entered. Y↓N→Perform the 11G-110 2K LCSS PWB Damage RAP, if necessary install a new 2K LCSS PWB, PL 11.26 Item 1. Check the wiring between the 2K LCSS PWB and the offline staple PWB. The wiring is good. Y↓N→Repair the wiring. Install a new offline staple PWB, PL 11.26 Item 3. Enter dC330, code 11-373, actuate the offline staple switch, S11-373. The display changes. Y↓N→Go to Flag 5 and check the wiring between the 2K LCSS PWB and the offline staple PWB. The wiring is good. Y↓N→Repair the wiring. Refer to the 11G-110 2K LCSS PWB Damage RAP, Install new components as necessary: • Offline staple PWB, PL 11.26 Item 3. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330, code 11-367, actuate the edge registration sensor, Q11-367. The display changes. Y↓N→Go to Flag 2, and Flag 3, check Q11-120. Refer to: • 11G-110 2K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. NOTE: The edge registration sensor Q11-367 that detects paper in position for stapling is an infra-red device. It has two parts, the receiver is mounted on the staple traverse assembly and the LED is mounted on the sensor support assembly PL 11.12 Item 5. •. • P/J308 and P/J314, 2K LCSS PWB. • 11D-110 2K LCSS Power Distribution RAP. •-110 2K LCSS Un-docking. Repair or install new components as necessary: • Edge registration sensor, PL 11.20 Item 8. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330, code 11-361, actuate the SH1 paper sensor, Q11-361. The display changes. Y↓N→Go to Flag 6 and check Q11-361. Refer to: • 11G-110 2K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. •. • P/J308, 2K LCSS PWB. • 11D-110 2K LCSS Power Distribution RAP. Repair or install new components as necessary: • SH 1 paper sensor, PL 11.12 Item 2. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330, code 11-365, manually actuate the SU1 safety gate switch, S11-365. The display changes. Y↓N→Go to Flag 1, and check S11-365. Refer to: • 11G-110 2K LCSS PWB Damage RAP. • GP 13, How to Check a Switch. •. • P/J311, 2K LCSS PWB. • 11D-110 2K LCSS Power Distribution RAP. Repair or install new components as necessary: • Safety gate interlock switch, PL 11.8 Item 1. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330, code 11-026 to run the paddle motor in reverse. The switch cam is rotated counter clockwise to it’s end stop. Y↓N→Go to 11-024-110, 11-025-110 Paddle Roll Failure RAP. If the stapler is still inoperative, install a new staple head unit, PL 11.20 Item 5. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5655

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie