Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 01-300 — Xerox WorkCentre 5665

Code: 01-300

Description: Front Door Open RAP 01-300 The front door has opened during machine operation.
Remedy: Switch off the electricity to the machine, GP 14. Disconnect the power cord from the customer supply while performing tasks that do not need electricity. Electricity can cause death or injury. Moving parts can cause injury. Enter dC330, code 01-300 front door interlock. Press start, open and close the front door. The display changes. Y↓N→Go to Flag 2. +12V is available at P/J147 pin 4 on the main drive PWB. Y↓N→Go to Flag 2. +12V is available at P/J147 pin 3 on the main drive PWB. Y↓N→Go to Flag 2. +12V is available at P/J16 pin 3 on the LVPS. Y↓N→Go to the 01F +12V Distribution RAP. Repair the wiring or the connector pins between P/J16 and P/J147. Remove the main drive module, (32-55 ppm) or (65-87 ppm). Flag 2, check the continuity to the xerographic module CRUM at P/J147, between pins 3 and 4. If necessary check and repair the wiring between the main drive module and the xerographic CRUM. Go to Flag 1. +12V is available at P/J17, pin 5. Y↓N→Install a new LVPS and base module, PL 1.10 Item 3. Go to Flag 1. +12V is available at P/J17, pin 6. Y↓N→Check the switch S01-300 and associated wiring. Refer to: • GP 13 How to Check a Switch. • P/J17 LVPS and base module. • Wiring Harness Repairs. If necessary, install a new door interlock switch, PL 1.10 Item 7. Go to Flag 3. Measure the signal at P/J26 pin 6 on the IOT PWB. +3.3V is measured. Y↓N→Install a new LVPS and base module, PL 1.10 Item 3. Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. Check that the front door, PL 8.10 Item 10 closes correctly. If not, check the following: • The jam clearance latch, PL 8.20 Item 5. • (32-38 ppm) the xerographic module latch, PL 9.22 Item 7. • (45-87 ppm) the xerographic module latch, PL 9.20 Item 7. • (32-55 ppm) the fuser latch, PL 10.8 Item 5. • (65-87 ppm) the fuser latch, PL 10.10 Item 5. • The post fuser jam clearance latch, PL 10.15 Item 11. • The latch cam handle, PL 10.15 Item 14.

← Xem tất cả mã lỗi Xerox WorkCentre 5665

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie