Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 05-330B, 05-331B — Xerox WorkCentre 5665

Code: 05-330B, 05-331B

Description: DADH Feed Sensor Failure RAP (45-87 ppm)
Remedy: Open the DADH top cover. Remove the DADH rear cover, PL 5.10 Item 1. Hold the top cover interlock switch closed. Enter dC330 code 05-330 to check the DADH feed sensor, Q05-330. Activate Q05-330. The display changes. Y↓N→Go to Flag 1. Check Q05-330. References: • GP 11 How to Check a Sensor. • P/J184 DADH PWB. • 01E +5V Distribution RAP. • The 5V return in the 01B 0V Distribution RAP. Install new components as necessary: • DADH feed sensor, PL 5.15 Item 2. • DADH PWB, PL 5.10 Item 5. Enter dC330 code 05-020 to run the DADH feed motor, MOT05-020. MOT05-020 runs. Y↓N→Go to the 05D DADH Motor Failure RAP. While MOT 05-020 runs, stack the code 05-025 to energize the DADH feed clutch, CL05-025. NOTE: The feed clutch disengages after 30 seconds. The feed motor stops after 3 minutes. CL05-025 energizes, the nudger rolls and the feed rolls rotate. Y↓N→Perform the steps that follow: • Go to the 05E DADH Feed Clutch Failure RAP and check CL05-025. • ADJ 5.1, DADH Drive Belt Adjustment. Enter dC330 code 05-010 to energize the DADH feed solenoid, SOL05-010. The feed roll assembly lowers, then raises after 10 seconds. Y↓N→Go to Flag 2. Check SOL05-010. References: • GP 12 How to Check a Solenoid or Clutch. • P/J183, DADH PWB and P/J201. • 01G +24V Distribution RAP. • The 24V return in the 01B 0V Distribution RAP. Install new components as necessary: • DADH feed solenoid, PL 5.15 Item 5. • DADH feed assembly, PL 5.15 Item 18. • DADH PWB, PL 5.10 Item 5. Perform the steps that follow: • Check that the DADH feed sensor, Q05-330 is installed correctly. If necessary, install a new feed roll assembly, PL 5.15 Item 1. • Ensure the feed motor drive belt and CVT motor drive belt are tensioned correctly, ADJ 5.1. • When large documents are fed (A3 or 11x17 inch), check the items that follow: – Check that the CVT motor rotates freely, refer to 05D DADH Motor Failure RAP – Check the CVT drive belt, refer to ADJ 5.1 DADH Drive Belt Adjustment. – Check that the CVT roll is clean and rotates freely, refer to ADJ 5.4. NOTE: If necessary install a new CVT motor, PL 5.25 Item 9. • Go to the 05E DADH Feed Clutch Failure RAP and check CL05-025. • Make sure that the size of the documents are sensed correctly. Refer to the 05C Document Size Sensor Failure RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5665

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie