Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 14-310 — Xerox WorkCentre 5665

Code: 14-310

Description: CCD PWB Not Detected RAP (32-55 ppm) 14-310 The scanner PWB detects an abnormal power supply voltage or a CCD PWB failure. NOTE: This fault code only applies to machines with a speed between 32 and 55 ppm.
Remedy: Go to Flag 1. Check the following voltages at P/J135 on the power distribution PWB: • +24V between pins 1 and 3. • +24V between pins 2 and 4. The voltages are good. Y↓N→Disconnect P/J135. Check the voltages again at P/J135 on the power distribution PWB. The voltages are good. Y↓N→Go to the following RAPs: • 01B 0V Distribution RAP, refer to the 24V return. • 01G +24V Distribution RAP. Check for a short circuit in the harness between P/J135 and P/J455. Repair the harness, or install a new harness, PL 14.25 Item 13. If the harness is good, install a new scanner PWB, PL 14.25 Item 4. Check that +24V is available in the scanner by entering the dC330 output code 14-005. The exposure lamp illuminates. Y↓N→Remove the CVT glass and document glass. Remove the PWB cover, 3 screws, PL 14.25 Item 1. Re-install the scanner top cover and GUI, but do not install the screws. Re-connect the power cord and switch on the machine, GP 14. Go to Flag 1. Check the following voltages at P/J455 on the scanner PWB: • +24V between pins 1 and 3. • +24V between pins 2 and 4. The voltages are good. Y↓N→Check for a open circuit on the harness between P/J135 and P/J455. Repair the harness, or install a new harness, PL 14.25 Item 13. Perform ADJ 14.1A Optics Cleaning Procedure. Go to the 14D Exposure Lamp Failure RAP. Go to Flag 2 and check the following voltages at P/J135 on the power distribution PWB: • +12V between pins 8 and 6. • +3.3V between pins 7 and 5. The voltages are good. Y↓N→Disconnect P/J135. Check the voltages again at the connector on the power distribution PWB. The voltages are good. Y↓N→Go to the relevant RAP: • 01B 0V Distribution RAP, refer to the 12V return and 3.3V return. • 01F +12V Distribution RAP. • 01D +3.3V Distribution RAP. Check for a short circuit on the harness between P/J135 and P/J450. Repair the harness, or install a new harness, PL 14.25 Item 13. Perform ADJ 14.1A Optics Cleaning Procedure. Perform dC640 Video Path Diagnostics, Scanner Video Test. The machine passes the diagnostic check. Y↓N→Install any new parts indicated by the diagnostic checks. Go to Flag 2. Check the following voltages at P/J450 on the CCD PWB: • +12V between pins 1 and 2. • +3.3V between pins 3 and 4. The voltages are good. Y↓N→Check for an open circuit in the harness between P/J135 and P/J450. Repair the harness, or install a new harness, PL 14.25 Item 13. Perform ADJ 14.1B Optics Cleaning Procedure. Install new components in the following order: • CCD harness, PL 14.25 Item 5. • Scanner PWB, PL 14.25 Item 4. • Scanner, PL 14.20 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 5665

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie