Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 08-190 — Xerox WorkCentre 5675

Code: 08-190

Description: Post Jam Clearance Initialization RAP 08-190 A stray sheet has been detected in either the IOT or finisher device during the post jam clearance initialization routine.
Remedy: • Enter the machine status mode and check for the active messages. Refer to OF4 Status Codes and Message RAP for the jam clearance procedure. • Check for paper in the machine paper path at all the sensor locations. • Check for paper in the finisher paper path at all the sensor locations. Use a flashlight to check that the hole punch sensor is clear. – 2K LCSS, PL 11.6 Item 7. – HVF, PL 11.153. – HCSS BM, PL 11.70 Item 9. • Make sure that all the covers and paper guides are closed, and latched correctly.
If the initial actions did not correct the problem. Switch off the machine, then switch on the machine, GP 14. If a fault code is displayed then go to the appropriate RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5675

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie