Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-043-130 — Xerox WorkCentre 5675

Code: 11-043-130

Description: Hole Punch Cycle Failure RAP 11-043-130 The hole punch fails to complete a cycle of operation. NOTE: The home position of the punch unit is when the cutout in the actuator is between the punch head home sensor jaws.
Remedy: NOTE: All HCSS interlocks must be made to supply +24V to the motors. Enter dC330, codes 11-043 punch head run, then 11-042 punch head move home.. The punch cycles, then goes to the home position. Y↓N→Go to Flag 3. Check the hole punch motor, MOT11-042. Refer to: • GP 10, How to Check a Motor. • P/J421, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Hole punch motor, PL 11.38 Item 7. • HCSS PWB, PL 11.56 Item 5. Enter dC330, code 11-110. Actuate the punch position sensor, Q11-110. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-110. Refer to: • GP 11, How to Check a Sensor. • P/J420, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Punch position sensor, PL 11.38 Item 9. • HCSS PWB, PL 11.56 Item 5. Enter dC330, code 11-350. Actuate the hole punch home sensor, Q11-350 The display changes. Y↓N→Go to Flag 2. Check the sensor, Q11-350. Refer to: • GP 11, How to Check a Sensor. • P/J420, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Hole punch home sensor, PL 11.38 Item 8. • HCSS PWB, PL 11.56 Item 5. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5675

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie