Description: HVF Rear Tamper Tray RAP 11-396-171 The rear tamper tray did not move from the home position. 11-397-171 The rear tamper tray did not return to the home position. 11-398-171 The rear tamper tray did not move from the away position. 11-399-171 The rear tamper tray did not return to the away position.
Remedy: Enter the dC330 code, 11-006, move rear tamper inboard. The tamper moves. Y↓N→Go to Flag 1. Check the wiring and repair as necessary. Check the rear tamper motor, MOT11-004. Refer to: • GP 10 How to Check a Motor. • P/J801 HVF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Rear tamper motor, MOT11-004, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Stack the dC330 code, 11-311, rear tamper home sensor. Move the tamper motor using the code 11-006, move motor inboard. The display changes. Y↓N→Go to Flag 2. Check the wiring and repair as necessary. Check the rear tamper home sensor, Q11-311. Refer to: • GP 11 How to Check a Sensor. • P/J401 HVF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Rear tamper home sensor, Q11-311, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Enter the dC330 code, 11-319, rear tamper away sensor. Actuate the rear tamper away sensor, using a piece of paper inserted from the rear of the machine. The display changes. Y↓N→Go to Flag 3. Check the wiring and repair as necessary. Check the rear tamper away sensor, Q11-319. Refer to: • GP 11 How to check a sensor. • P/J401 HVF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Rear tamper away sensor, Q11319, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Perform SCP 6 Final Actions.