Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 03-310 — Xerox WorkCentre 5685

Code: 03-310

Description: Image Processing PWB to UI Error RAP 03-310 The image processing PWB cannot communicate with the UI within one minute of power-on or after three retries.
Remedy: • Switch off the machine, then switch on the machine, GP 14. • Check the fault history file for other 03-xxx fault codes. If the 03-xxx fault codes occur randomly, the cause may be due to electrical noise. Go to OF10 intermittent Failure RAP.
1. Ensure all the connectors on the PWBs that follow are correctly and securely seated: • Image processing PWB, (32-55 ppm) PL 3.20 Item 3 or (65-87 ppm) PL 3.10 Item 3. • Power distribution PWB, (32-55 ppm) PL 3.20 Item 5 or (65-87 ppm) PL 3.10 Item 5. • UI PWB, (32-55 ppm) PL 2.15 Item 7 or (65-87 ppm) PL 2.10 Item 6. 2. Go to Flag 1, Flag 2 and Flag 3. Check the wiring. If necessary, install a new image processing PWB module/UI harness, (32-55 ppm) PL 14.20 Item 9 or (65-87 ppm) PL 14.10 Item 9. 3. Go to Flag 1. Check the voltages. Refer to: • 01B 0V Distribution RAP. • 01D +3.3V Distribution RAP. • 01F +12V Distribution RAP. 4. Install new components as necessary: • Image processing PWB, (32-55 ppm) PL 3.20 Item 3 or (65-87 ppm) PL 3.10 Item 3. • User interface PWB, (32-55 ppm) PL 2.15 Item 7 or (65-87 ppm) PL 2.10 Item 6.

← Xem tất cả mã lỗi Xerox WorkCentre 5685

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie