Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-043-170, 11-350-170 — Xerox WorkCentre 5685

Code: 11-043-170, 11-350-170

Description: Hole Punch Cycle Failure RAP 11-043-170 The hole punch fails to complete a cycle of operation.
Remedy: NOTE: All HCSS BM interlocks must be made to supply +24V to the motors. Enter dC330, codes 11-043 punch head run and 11-042 punch head move home.. The punch cycles continuously, then goes to the home position Y↓N→Go to Flag 3. Check the hole punch motor, MOT11-042. Refer to: • GP 10, How to Check a Motor. • P/J421, HCSS PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • Hole punch motor, PL 11.70 Item 7. • HCSS PWB, PL 11.92 Item 5. Enter dC330, code 11-350 actuate the punch head home sensor, Q11-350. The display changes. Y↓N→Go to Flag 2. Check the sensor, Q11-350. Refer to: • GP 11, How to Check a Sensor. • P/J420, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • Punch head home sensor, PL 11.70 Item 8. • HCSS PWB, PL 11.92 Item 5. Enter dC330, code 11-110 actuate the punch head home sensor, Q11-110. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-350. Refer to: • GP 11, How to Check a Sensor. • P/J420, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • Punch sensor, PL 11.70 Item 9. • HCSS PWB, PL 11.92 Item 5. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5685

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie