Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-100-110 — Xerox WorkCentre 5685

Code: 11-100-110

Description: 2K LCSS Paper Entry RAP 11-100-110 The leading edge of the sheet is late to the entry sensor Q11-100.
Remedy: • 2K LCSS PWB DIP switch settings, refer to 11F-110 2K LCSS PWB DIP Switch Settings RAP. • Ensure the paper tray guides are set to the correct position for the size of paper in the tray. • Check the input guide for damage or wear that could cause paper to jam. • Paper jam in the machine to 2K LCSS paper path, ADJ 11.2-110 Machine to 2K LCSS Alignment. • IOT exit path and feed rolls. • Feeding performance from a paper tray loaded with a new ream of paper.
NOTE: In diagnostics, actuating any 2K LCSS sensor or switch can change the displayed state on the UI. Make sure that the correct sensor or switch is tested. Lower the paper entry guide assembly, PL 11.14 Item 8, to access the entry sensor. Enter dC330, code 11-100. Actuate the entry sensor, Q11-100. The display changes. Y↓N→Go to Flag 1 and check Q11-100. Refer to: • 11G-110 2K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. • P/J304, 2K LCSS PWB. • 11D-110 2K LCSS Power Distribution RAP. Repair or install new components as necessary: • Entry sensor, PL 11.24 Item 3. • 2K LCSS PWB, PL 11.26 Item 1. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5685

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie