Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-100-130 — Xerox WorkCentre 5685

Code: 11-100-130

Description: HCSS Paper Entry RAP 11-100-130 The leading edge of the sheet is late to the HCSS.
Remedy: NOTE: All HCSS interlocks must be made to supply +24V to the motors. Enter dC330, code 11-100. Actuate the entry sensor, Q11-100. The display changes. Y↓N→Go to Flag 1. Check the sensor Q11-100. Refer to: • GP 11, How to Check a Sensor. • P/J420, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Entry sensor Q11-100, PL 11.38 Item 9. • HCSS PWB, PL 11.56 Item 5. Enter dC330, code 11-000, transport motor 1A. The motor runs. Y↓N→Go to Flag 4. Check transport motor 1A. Refer to: • GP 10, How to Check a Motor. • P/J425, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Transport motor 1A, PL 11.38 Item 5. • HCSS PWB, PL 11.56 Item 5. Enter dC330, code 11-000, transport motor 1B. The motor runs. Y↓N→Go to Flag 3. Check transport motor 1B. Refer to: • GP 10, How to Check a Motor. • P/J419, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Transport motor 1B, PL 11.38 Item 5. • HCSS PWB, PL 11.56 Item 5. Enter dC330, code 11-002, diverter solenoid, SOL11-002. The solenoid energises. Y↓N→Go to Flag 2. Check the diverter solenoid, SOL11-002. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J421, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Diverter solenoid SOL11-002, PL 11.36 Item 3. • HCSS PWB, PL 11.56 Item 5. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5685

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie