Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-191-171, 11-193-171, 11-194-171, 11-196-171 — Xerox WorkCentre 5685

Code: 11-191-171, 11-193-171, 11-194-171, 11-196-171

Description: Inserter Paper Jam RAP 11-191-171 The leading edge is late arriving at the PPI tab standby sensor. 11-193-171 The trailing edge is late leaving the PPI tab standby sensor. 11-194-171 The leading edge is late arriving at the PPI pickup sensor. 11-196-171 The trailing edge is late leaving the IDG pickup sensor. Fault code 11-191 may also be generated where a fault in the inserter causes jamming in the IOT.
Remedy: . shows the location of the components. Enter dC330 code 11-155. Manually actuate the Pickup sensor, Q11-155. The display changes. Y↓N→Go to Flag 1 and Flag 2. Check the sensor, Q11-155. Refer to: • GP 11, How to Check a Sensor. • P/J6, P/J4, Inserter PWB. • P/J701, HVF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Pickup sensor, PL 11.179 Item 11. • Inserter PWB, PL 11.179. • HVF control PWB, PL 11.157 Item 2. Measure the voltage of pin 2 of P/J11. Manually actuate the acceleration sensor. The voltage changes. Y↓N→Go to Flag 3 and Flag 4. Check the sensor. Refer to: • GP 11, How to Check a Sensor. • P/J6, P/J4, Inserter PWB. • P/J701, HVF control PWB. Install new components as necessary: • Acceleration sensor, PL 11.179 Item 11. • Inserter PWB, PL 11.179. • HVF control PWB, PL 11.157 Item 2. Measure the voltage at pin 2 of P/J702 on the HVF PWB. Manually actuate the PPI standby sensor. The voltage changes. Y↓N→Go to Flag 5. Check the sensor. Refer to: • GP 11, How to Check a Sensor. • P/J702, HVF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • PPI standby sensor, PL 11.156. • HVF control PWB, PL 11.157 Item 2. Enter dC330 code 11-077. Energize the inserter, CL 11-077. The clutch energies. Y↓N→Go to Flag 6 and Flag 7. Check the clutch, CL 11-077. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J12, P/J5, Inserter control PWB • P/J703, HCF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter clutch, PL 11.179. • Inserter control PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Enter dC330, code 11-078 to run the inserter motor, MOT 11-078. The motor runs. Y↓N→Go to Flag 8 and Flag 9. Check the motor, MOT 11-078. Refer to: • GP 10 How to Check a Motor. • P/J701, HVF control PWB. • P/J4, inserter control PWB • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter motor, PL 11.181 Item 1. • Inserter control PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Perform SCP 6, Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5685

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie