Description: HVF Front Tamper Tray RAP 11-392-171 The front tamper tray did not move from the home position. 11-393-171 The front tamper tray did not return to the home position. 11-394-171 The front tamper tray did not enter the away position. 11-395-171 The front tamper tray did not move from the away position.
Remedy: shows the location of the components. Enter dC330, code 11-003 to move the tamper inboard, and enter 11-005 to move the tamper outboard. The tamper moves. Y↓N→Go to Flag 1. Check the wiring and repair as necessary. Check the front tamper motor, MOT11-003. Refer to: • GP 10 How to Check a Motor. • P/J902 HVF PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Front tamper motor, MOT11-003, PL 11.153 Item 6. • HVF control PWB, PL 11.157 Item 2. Stack the dC330 code 11-310, front tamper home sensor. Move the motor using its control code 11-003 or 11-005. The display changes. Y↓N→Go to Flag 2. Check the wiring and repair as necessary. Check the front tamper home sensor, Q11-310. Refer to: • GP 11 How to Check a Sensor. • P/J901 HVF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Front tamper home sensor, Q11-310, PL 11.153. • HVF control PWB, PL 11.157 Item 2. Stack the dC330 code 11-174, front tamper away sensor. Move the motor using its control code 11-003 or 11-005. The display changes. Y↓N→Go to Flag 3. Check the wiring and repair as necessary. Check the front tamper away sensor, Q11-174. Refer to: • GP 11 How to Check a Sensor. • P/J901 HVF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Front tamper away sensor, Q11-174, PL 11.153. • HVF control PWB, PL 11.157 Item 2. Perform SCP 6 Final Actions.