Description: HVF BM Staple Head 2 and Stapler Module RAP 11-403-171 The booklet maker staple head 2 motor has failed to move. 11-413-171 The booklet maker staple head 2 is not detected in the home position. 11-414-171 The booklet maker stapler module is not detected in the home (staple head closed) position during hard / soft initialize, or at set boundary.
Remedy: Enter dC330, code 11-421 to check the BM staple head carrier closed sensor, Q11-421. Open and close the staple head carrier. The display changes. Y↓N→Go to Flag 1, check the staple head carrier closed sensor, Q11-421. Refer to: • GP 11, How to Check a Sensor. • P/J552, BM PWB. • 11A-171 HVF BM Power Distribution RAP. Install new components as necessary: • BM staple head carrier closed sensor, PL 11.168. • BM PWB, PL 11.166 Item 10. Enter dC330, code 11-403 to run the BM SH2 motor, stack the code 11-413 to check the BM SH2 home switch. The display changes. Y↓N→The staple head cycled when the first code was entered. Y↓N→Go to Flag 3 and check the wiring and connectors between P/J560 and PJ586. The wiring and connectors are good. Y↓N→Repair the wiring or connectors. Install a new BM staple head 2, PL 11.168 Item 11. Go to Flag 2, check the BM SH2 home switch, S11-413. Refer to: • GP 13, How to Check a Switch. • P/J551, BM PWB. • 11A-171 HVF BM Power Distribution RAP. Install new components as necessary: • BM staple head 2, PL 11.168 Item 11. • BM PWB, PL 11.166 Item 10. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • BM staple head carrier closed sensor, PL 11.168 Item 18. • BM staple head 2, PL 11.168 Item 11. • BM PWB, PL 11.166 Item 10.