Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-450-171, 11-456-171 ... 11-459-171 — Xerox WorkCentre 5685

Code: 11-450-171, 11-456-171 ... 11-459-171

Description: HVF Ejector Module RAP 11-450-171 The ejector module motor has stalled 11-456-171 The ejector module did not return to the home position. 11-457-171 The ejector module did not move from the home position. 11-458-171 The ejector module did not return to the out position. 11-459-171 The ejector module did not move from the out position.
Remedy: shows the location of the components. Enter the dC330 code 11-320, ejector home sensor. Stack the dC330 code 11-053 to move the stapler unit inboard, and observe the display. This action moves the stapler unit inboard, and moves the ejector module to the out position. The display changes. Y↓N→The ejector module moved to the out position. Y↓N→Go to Flag 2. Check the wiring and repair as necessary. Check the ejector unit motor, MOT11-020. Refer to: • GP 10 How to Check a Motor. • P/J801 HVF PWB. • 11A-171, HVF BM Power Distribution RAP. Install new components as necessary: • Ejector unit motor, MOT11-023, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Go to Flag 1. Check the wiring and repair as necessary. Check the ejector home sensor, Q11-320. Refer to: • GP 11 How to Check a Sensor. • P/J401 HVF control PWB. • 11A-171, HVF BM Power Distribution RAP. Install new components as necessary: • Ejector home sensor, Q11-320, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Exit the diagnostics mode, selecting the Re-boot option. This returns the ejector module to the home position. Enter the dC330 code, 11-322, ejector out sensor. Stack the dC330 code, 11-053 to move the stapler unit inboard, and observe the display. The display changes. Y↓N→Go to Flag 3. Check the wiring and repair as necessary. Check the ejector unit out sensor, Q11-322. Refer to: • GP 11 How to Check a Sensor. • P/J401 HVF control PWB. • 11A-171, HVF BM Power Distribution RAP. Install new components as necessary: • Ejector unit out sensor, Q11-322, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Exit the diagnostics mode, selecting the Re-boot option. This returns the ejector module to the home position. Enter the dC330 code 11-177, ejector motor encoder. Stack the dC330 code, 11-053 to move the stapler unit inboard, and observe the display. The display changes condition for a few seconds. Y↓N→Go to Flag 4. Check the wiring and repair as necessary. Check the ejector motor encoder, Q11-177. Refer to: • GP 10 How to Check a Motor. • P/J401 HVF control PWB. • 11A-171, HVF BM Power Distribution RAP. Install new components as necessary: • Ejector motor encoder, Q11-177, PL 11.140. • HVF control PWB, PL 11.157 Item 2. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5685

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie