Description: Bin 1 Movement Failure RAP 11-030-130 Bin 1 fails to move. 11-336-130 Bin 1 is not at the home position. NOTE: The home position is at the uppermost position.
Remedy: NOTE: All HCSS interlocks must be made to supply +24V to the motors. Enter dC330, codes 11-032 bin 1 elevator motor down to run the bin 1 elevator motor, MOT11- 030. MOT11-030 runs. Y↓N→Go to Flag 2. Check MOT11-030. Refer to: • GP 10, How to Check a Motor. • P/J424, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Bin 1 elevator motor, PL 11.52 Item 11. • HCSS PWB, PL 11.56 Item 5. Enter dC330, codes 11-032 bin 1 elevator motor down, then 11-030 bin 1 elevator motor home. Bin 1 moves away from, then back to, the home position. Y↓N→Check the bin 1 front and rear elevator belts: • Ensure that both belts are correctly positioned on the upper and lower pulleys. • Ensure that bin 1 is securely clamped to both elevator belts. Enter dC330, code 11-334, actuate the bin 1 upper limit switch, S11-334. The display changes. Y↓N→Go to Flag 3. Check the switch S11-334. Refer to: • GP 13, How to Check a Switch. • P/J424, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary. • Bin 1 upper limit switch, PL 11.52 Item 1. • HCSS PWB, PL 11.56 Item 5. Enter dC330, code 11-335, actuate the bin 1 lower limit switch, S11-335. The display changes. Y↓N→Go to Flag 4. Check the switch S11-335. Refer to: • GP 13, How to Check a Switch. • P/J424, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary. • Bin 1 lower limit switch, PL 11.52 Item 2. • HCSS PWB, PL 11.56 Item 5. Enter dC330, code 11-035, actuate the bin 1 empty sensor, Q11-035. The display changes. Y↓N→Go to Flag 1. Check the sensor Q11-035. Refer to: • GP 11, How to Check a Sensor. • P/J416, HCSS PWB. • 11C-130 HCSS Power Distribution RAP. Install new components as necessary: • Bin 1 empty sensor, PL 11.52 Item 5. • HCSS PWB, PL 11.56 Item 5. Perform SCP 6 Final Actions.