Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-063-171, 11-411-171 — Xerox WorkCentre 5687F

Code: 11-063-171, 11-411-171

Description: HVF BM Staple Unit 1 Failure RAP 11-063-171 The HVF BM staple unit 1 has failed to leave the home position. 11-411-171 The HVF BM staple unit 1 has failed to return to the home position.
Remedy: Enter dC330, code 11-421 to check the BM staple head carrier closed sensor, Q11-421. Open and close the staple head carrier. The display changes. Y↓N→Go to Flag 1, check the BM staple head carrier closed sensor, Q11-421. Refer to: • GP 11, How to Check a Sensor. • P/J552, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • BM staple head carrier closed sensor, PL 11.168 Item 18. • BM PWB, PL 11.166 Item 10. Enter dC330, code 11-063 to run the BM SH1 motor. Stack the code 11-411 to check the BM SH1 home switch. The display changes. Y↓N→The staple head cycled when the first code was entered. Y↓N→Go to Flag 3 and check the wiring and connectors between P/J560 and P/J585. The wiring and connectors are good. Y↓N→Repair the wiring or connectors. Install a new BM staple head 1, PL 11.168 Item 7. Go to Flag 2, check the BM SH1 home switch, S11-411. Refer to: • GP 13, How to Check a Switch. • P/J551, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • BM staple head 1, PL 11.168 Item 7. • BM PWB, PL 11.166 Item 10. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • BM staple head 1, PL 11.168 Item 7. • BM PWB, PL 11.166 Item 10.

← Xem tất cả mã lỗi Xerox WorkCentre 5687F

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie