Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-065-170, 11-383-170 — Xerox WorkCentre 5687F

Code: 11-065-170, 11-383-170

Description: HCSS BM Backstop Failure RAP 11-065-170 The HCSS BM backstop motor fails to move. 11-383-170 The HCSS backstop is not at the home position.
Remedy: Enter dC330 code 11-383. Actuate the BM backstop guide home sensor. The display changes. Y↓N→Go to Flag 1, check the sensor, Q11-383. Refer to: • GP 11, How to Check a Sensor. • P/J556, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM backstop guide home sensor, PL 11.82 Item 18. • BM PWB, PL 11.86 Item 10. Enter dC330, code 11-065 to run the BM backstop motor, MOT 11-065. The motor runs. Y↓N→Go to Flag 2 and Flag 3, check the motor, MOT 11-065. Refer to: • GP 10 How to Check a Motor. • P/J554, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM backstop motor, PL 11.82 Item 4. • BM PWB, PL 11.86 Item 10. Go to Flag 4, Check the BM stack hold solenoid SOL 11-076. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J555, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM PWB, PL 11.86 Item 10. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • BM backstop guide home sensor, PL 11.82 Item 18. • BM backstop motor, PL 11.82 Item 20. • BM PWB, PL 11.86 Item 10.

← Xem tất cả mã lỗi Xerox WorkCentre 5687F

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie