Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-110-110 — Xerox WorkCentre 5687F

Code: 11-110-110

Description: Sheet Late to Hole Punch RAP 11-110-110 Sheet late at the punch sensor.
Remedy: Check the following: • The 2K LCSS PWB DIP switch settings, refer to 11F-110 2K LCSS PWB DIP Switch Settings RAP. • Ensure the paper tray guides are set to the correct position for the size of paper in the tray. • For a paper jam at the entrance to the 2K LCSS. Check that there is no obstruction that would prevent a sheet from arriving in position for punching, refer to the 11H-110 Copy Damage in the 2K LCSS RAP. • The punch sensor, Q11-110 for chad debris.
NOTE: In diagnostics, actuating any 2K LCSS sensor or switch can change the displayed state on the UI. Make sure that the correct sensor or switch is tested.. Enter dC330, code 11-110. Actuate the punch sensor, Q11-110. The display changes. Y↓N→Go to Flag 1 and check Q11-110. Refer to: • 11G-110 2K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. • P/J307, 2K LCSS PWB. • 11D-110 2K LCSS Power Distribution RAP Repair or install new components as necessary: • Punch sensor, PL 11.6 Item 7. • 2K LCSS PWB, PL 11.26 Item 1. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5687F

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie