Description: DADH Open RAP 05-300 The DADH closed switch detects that the DADH is open during run.
Remedy: NOTE: (W/O TAG 150) To get access to the bulkhead connector, remove the user interface assembly, PL 2.10 Item 1. To get access to the DADH closed switch, remove the top cover, PL 14.20 Item 3, from the scanner module. To get access to the scanner PWB, remove the document glass, PL 14.20 Item 5 and the scanner PWB cover, PL 14.25 Item 1. NOTE: (W/TAG 150) To get access to the bulkhead connector, remove the user interface assembly, PL 2.10 Item 1. To get access to the DADH closed switch, remove the top cover, PL 14.10 Item 3, from the scanner module. To get access to the scanner PWB, remove the document glass, PL 14.10 Item 5 and the scanner PWB cover PL 14.15 Item 1. Enter dC330 code 05-300 to check the DADH closed switch, S05-300. Open and close the DADH. The display changes. Y↓N→Go to Flag 1. Check S05-300. References: • GP 13 How to Check a Switch. • (W/O TAG 150) P/J453 and the bulkhead connector. • (W/TAG 150) P/J927 and the bulkhead connector. • 01D +3.3V Distribution RAP. • The 3.3V return in the 01B 0V Distribution RAP. Install new components as necessary: • DADH closed switch (W/O TAG 150), PL 14.25 Item 6. • DADH closed switch (W/TAG 150), PL 14.15 Item 6. • Scanner PWB (W/O TAG 150), PL 14.25 Item 4. • Scanner PWB (W/TAG 150), PL 14.15 Item 4. Perform the steps that follow. Install new components as necessary: • Check that S05-300 is installed correctly. • Check the DADH frame for distortion, go to ADJ 5.2. If the DADH frame is distorted, install a new DADH, PL 5.10 Item 9.