Description: HVF BM Staple Unit 1 Failure RAP 11-063-171 The HVF BM staple unit 1 has failed to leave the home position. 11-411-171 The HVF BM staple unit 1 has failed to return to the home position.
Remedy: Enter dC330, code 11-421 to check the BM staple head carrier closed sensor, Q11-421. Open and close the staple head carrier. The display changes. Y↓N→Go to Flag 1. Check the BM staple head carrier closed sensor, Q11-421. Refer to: • GP 11, How to Check a Sensor. • P/J552, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • BM staple head carrier closed sensor, PL 11.168 Item 18. • BM PWB, PL 11.166 Item 10. Remove the HVF front door and door support, refer to-171 HVF Covers. Pull out the BM module. Remove the staple head 1 cover, PL 11.168 Item 14. Enter dC330, code 11-411 to check the BM SH1 home switch. Manually rotate the staple head to actuate the BM SH1 home switch. The display changes. Y↓N→Go to Flag 2. Check the BM SH1 home switch, S11-411. Refer to: • GP 13, How to Check a Switch. • P/J551, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • BM staple head 1, PL 11.168 Item 7. • BM PWB, PL 11.166 Item 10. Enter dC330 code 11-063 to run the BM SH1 motor. The staple head cycled. Y↓N→Go to Flag 3. Check the wiring and connectors between P/J560 and P/J585. The wiring and connectors are good. Y↓N→Repair the wiring or connectors. Install a new BM staple head 1, PL 11.168 Item 7. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • BM staple head 1, PL 11.168 Item 7. • BM PWB, PL 11.166 Item 10.