Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11B-171 — Xerox WorkCentre 5735

Code: 11B-171

Description: HVF BM to Machine Communications Interface and BM Present RAP A communication fault exists between the HVF BM and the machine.
Remedy: shows the communications between the booklet maker and the HVF control PWB. For communications between the HVF control PWB and the machine, go to the 03-360, 03-408 to 03-410, 03-418 IOT to Output Device Error RAP. The pulses on the connections at Flag 1 cannot be measured, but may be detected using a meter that can record maximum and minimum voltage levels, or by using an AC voltage range. Check the wiring and repair as necessary. Refer to: • P/J133, HVF Control PWB. • P/J562, BM PWB. If necessary, install new components: • BM PWB, PL 11.166 Item 10. • HVF control PWB, PL 11.157 Item 2. If the machine indicates that the booklet maker is not present, check that P/J133, pin 6 is held at zero. If necessary, repair the wiring or install a new HVF control PWB, PL 11.157 Item 2.

← Xem tất cả mã lỗi Xerox WorkCentre 5735

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie