Description: DADH Takeaway Sensor Failure RAP 05-335 The DADH takeaway sensor does not detect the lead edge of the document within the correct time.
Remedy: NOTE: To get access to the DADH takeaway sensor, remove the DADH top cover, PL 5.20 Item 15. Open the DADH top cover. Enter dC330 code 05-335 to check the DADH takeaway sensor, Q05-335. Activate Q05-335. The display changes. Y↓N→Go to Flag 1. Check Q05-335. References: • GP 11 How to Check a Sensor. • P/J186, DADH PWB and P/J191. • 01D +3.3V Distribution RAP. • 01B 0V Distribution RAP. Refer to the 3.3V return. Install new components as necessary: • DADH takeaway sensor, PL 5.20 Item 11. • DADH PWB, PL 5.10 Item 5. Remove the DADH rear cover, PL 5.10 Item 1. Hold the top cover interlock switch closed. Enter dC330 code 05-020 to run the DADH feed motor, MOT05-020. MOT05-020 runs. Y↓N→Go to the 05D DADH Motor Failure RAP. The takeaway roll rotates. Y↓N→Perform the steps follow: • Check the feed motor drive belt, PL 5.35 Item 5. • ADJ 5.1, Feed Motor Drive Belt Adjustment. • Check the takeaway roll and pulley, PL 5.35 Item 6 and PL 5.35 Item 15, refer to GP 7. Perform the steps that follow: • Check that the DADH feed sensor, Q05-335 is installed correctly. • Go to the 05E DADH Feed Clutch Failure RAP and check the DADH feed clutch. • Make sure that the takeaway roll is clean and rotates freely, refer to ADJ 5.4. • Make sure that the takeaway roll idlers are clean and rotate freely, refer to ADJ 5.4. • Check the takeaway roll static eliminator and ground harness, PL 5.35 Item 7. • Make sure that the DADH ground harness is connected correctly, PL 5.10 Item 11. • ADJ 5.1 Feed Motor Drive Belt Adjustment. Install new components as necessary: • DADH takeaway roll, PL 5.35 Item 6. • DADH input tray assembly, PL 5.35 Item 1. • DADH top access cover assembly, PL 5.20 Item 17. • DADH feed assembly (35 ppm), PL 5.15 Item 18. • DADH feed assembly (40-90 ppm), PL 5.17 Item 18. If the fault continues, make sure that documents correctly continue past the previous sensor in the document path. Refer to the 05-330, 05-331 DADH Feed Sensor Failure Entry RAP.