Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 09-399 — Xerox WorkCentre 5740

Code: 09-399

Description: Incompatible Xerographic Module RAP 09-399 The xerographic module CRUM failed the authorization check. The authorization check is performed to ensure that the xerographic module installed in the system is compatible with the current machine configuration and the customer service plan.
Remedy: To check the chosen service plan: 1. Enter Customer Administration Tools, GP 24. 2. Select Consumables Management. 3. Select Service Plan. 4. The greyed out icon will indicate the chosen service plan. Refer to Table 1. NOTE: All new machines are configured to metered. A customer with an unmetered plan should only have new sold xerographic module.
A Sold - Xerox service agreement does not include the cost of the xerographic module B Meter - Xerox service agreement does include the cost of the xerographic module C Aftermarket -System will accept non-Xerox and OEM supplied xerographic module with no CRUM D Not used
To Change the Service Plan Type 1. Obtain the machine serial number. 2. Enter the Service Plan, refer to the Procedure. 3. Contact the market region technical specialist for a confirmation number. 4. Enter the confirmation number. 5. Press Enter. 6. Follow the message set to Exit. 7. Check that the service plan is correct. OpCo ID (Market Region) Validation Criteria The xerographic module will be sold in the following market regions. • NASG-N - North american solutions group. • NASG-S - North american solutions group. • ESG - European solutions group. • DMO-E - Developing markets east. • DMO-W - Developing markets west. For each market region the system will support the xerographic modules configured as indicated by ‘Yes’ in Table 2. e.g. a xerographic module configured as NASG-S will function in the following machine / market regions: NASG-N, NASG-S and DMO-W. Xerographic modules configured to ‘world wide’ are for all markets. The system will not accept a xerographic module that does not match the OpCo ID (market region) of the system. If there is a mismatch between the system configuration and the OpCo ID then an incompatible xerographic module message will be displayed on the GUI.

← Xem tất cả mã lỗi Xerox WorkCentre 5740

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie