Code: 03130031-2F24
Description: Cutter drive time-out error. After the cutter motor was driven of the cutter unit, cutter right detection sensor or cutter HP sensor ON was not able to be detected in the regulation time.
Causes: Cutter right position sensor, cutter HP sensor, cutter motor, cutter unit, cutter driver PCB, or main controller PCB
Remedy: 1. Visual check Remove foreign substances from the cutter unit if any. 2. Cutter right position sensor and cutter HP sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the feed roller HP sensor. 3. Cable continuity check If continuity of the cable between the cutter right position sensor, the cutter HP sensor, the cutter motor and the cutter driver PCB is abnormal, replace the cable. 4. Replace the cutter motor. 5. Replace the cutter unit. 6. Replace the cutter driver PCB. 7. Cable continuity check If continuity of the cable between the cutter driver PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB.