Code: 03130031-2F2E
Description: Roll drive time-out error. The roll cam sensor home position in roll feed unit could not be detected within the specified time.
Causes: roll cam drive unit, roll cam sensor, roll motor, Connector, roll feed unit PCB, or main controller PCB
Remedy: 1. Visual check If the gear in roll cam drive unit is abnormal, replace the gear. 2. Roll cam sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the roll cam sensor. 3. Cable continuity check If continuity of the cable between the roll cam sensor, roll motor and roll feed unit PCB is abnormal, replace the cable. 4. Replace the roll motor. 5. Replace the roll feed unit PCB. 6. Cable continuity check If continuity of the cable between the roll feed unit PCB and main controller PCB is abnormal, replace the cable. 7. Replace the connector. 8. Replace the main controller PCB.