Description: HVF BM +24V Failure RAP 11-463-171 The booklet maker control PWB has failed to detect +24V at the input from the HVF. 11-464-171 The booklet maker control PWB has detected an internal +24V failure, such as over current, short circuit or under voltage.
Remedy: Close or cheat all the HVF BM interlocks. The HVF BM performs a mechanical reset. Y↓N→Go to Flag 1. ACL is available at PJ22 on the LVPS and base module between pins 1 and 2. Y↓N→Go to the 01C AC Power RAP and check the AC output voltages. Go to Flag 2. +24V is available at P/J111 between pins 1 and 4. Y↓N→Refer to. +24V is available at T001 on the HVF power supply between pins 1 and 5. Y↓N→Install a new HVF power supply module, PL 11.157 Item 1. Check the connectors and harness between T001 and PJ111. Repair the harness as necessary. Go to Flag 3. +24V is available at P/J111 between pins 1 and 4, between pins 2 and 5 and between pins 3 and 6. Y↓N→Go to the 11-300-171, 11-302-171, 11-303-171 HVF Docking and Interlock RAP. Go to Flag 4. +24V is available at P/J559 between pins 1 and 2. Y↓N→+24V is available at P/J131 between pins 1 and 2. Y↓N→Install a new HVF control PWB, PL 11.157 Item 2. Check the connectors and harness between P/J559 and P/J131. Repair the harness as necessary. If an inserter is installed, go to P/J703. +24V is available between P/J703 pin 1 and P/ J111 pin 1. Y↓N→Go to 11-306-171, 11-309-171 HVF Inserter Interlock RAP Go to Flag 5. +24V is available at P/J601 between pins 1 and pin 4. Y↓N→Install a new BM PWB, PL 11.166 Item 10. Go to Flag 6. +24V is available at P/J601 between pins 4 and 6. Y↓N→Go to the 11-300-171, 11-302-171, 11-303-171 Docking and Interlocks RAP. The +24V supply are good. Go to SCP 6 Final actions. The +24V supply are good. Go to SCP 6 Final actions.