Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 14C — Xerox WorkCentre 5755

Code: 14C

Description: Scanning Document Size RAP (W/TAG 150)
Remedy: shows the component location. Go to Flag 1. Check the voltages at P/J136 on the power distribution PWB. As necessary, refer to: • 01D +3.3V Distribution RAP. • 01E +5V Distribution RAP. • 01G +24V Distribution RAP. • 01B 0V Distribution RAP. Remove the following components, • DADH. • Document glass. • Document size sensor cover. Check the wiring between P/J136 on the power distribution PWB in the single board controller PWB module and P/J920 on the scanner PWB. Repair as necessary or install a new single board controller PWB/DADH comms/scanner power harness, PL 14.15 Item 5. Check that the input module angle sensor actuator is not damaged, if necessary, install a new actuator, PL 14.15 Item 21. Switch the machine off, then switch the machine on GP 14. The fault is still present Y↓N→Perform SCP 6 final actions. Reinstall the DADH. Enter the dC330 input code 14-310, Document Handler Angle Sensor and actuate the input module angle sensor, Q14-310 by opening and closing the DADH. The display changes. Y↓N→Go to Flag 2. Check the input module angle sensor, Q14-310. Refer to GP 11, How to Check a Sensor. Repair or install new components as necessary: • Input module angle sensor, PL 14.15 Item 16. • Scanner PWB, PL 14.15 Item 4. Reinstall the document size sensor cover. Raise the DADH, enter the dC330 input code 14-315, actuate the document size sensor 1, Q14-315 by placing a piece of paper above the sensor. Enter the dC330 input code 14-320 and repeat the test for document size sensor 2, Q14-320. The display changes for both sensors. Y↓N→Go to Flag 3. Check the document size sensors 1 and 2, refer to: • GP 11 How to Check a Sensor. NOTE: If necessary, temporarily install the document glass when checking the size sensors, to ensure that the document is the correct distance from the sensor. Repair or install new components as necessary: • Document size sensor, PL 14.15 Item 3. • Scanner PWB, PL 14.15 Item 4. Reassemble the scanner, then perform dC604 Registration Setup.

← Xem tất cả mã lỗi Xerox WorkCentre 5755

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie