Code: 03800400-2803
Description: Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely.
Causes: Printhead, carriage PCB, carriage unit, or main controller PCB.
Remedy: 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB.