Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 08-131 — Xerox WorkCentre 5765

Code: 08-131

Description: Lead Edge Late to Tray 3 Exit Sensor RAP (W/TAG 151) 08-103 The lead edge of the paper sheet fed from tray 3 reached the tray 3 feed sensor but did not reach the tray 3 exit sensor.
Remedy: NOTE: The front door interlock must be cheated when checking +24V components. Locate the tray 3 exit sensor, Q08-109.. Enter dC330 code 08-109 tray 3 exit sensor, Q08-109. Press Start. Manually actuate the sensor using white paper. The display changes. Y↓N→Go to Flag 1. Check Q08-109. Refer to: • GP 11 How to Check a Sensor. • P/J19, HCF control PWB. • 01E +5V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • Tray 3 exit sensor, PL 8.32 Item 6. • HCF control PWB, PL 7.21 Item 2. CAUTION To prevent damage to the feed mechanism, the paper tray must be pulled out before MOT 08- 030 is run in diagnostics. Enter dC330 code 08-030 tray 3 feed motor, MOT08-030. Pull out the tray. Press Start. The motor runs. Y↓N→Go to Flag 3. Check MOT08-030. Refer to: • GP 10 How to Check a Motor. • P/J4, HCF control PWB. • 01G +24V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • Tray 3 feed motor, PL 8.32 Item 11. • HCF control PWB, PL 7.21 Item 2. Locate the tray 3 feed clutch, CL08-033.. Enter dC330 code 08-030 tray 3 feed motor, MOT08-030, stack the code 08-033 tray 3 feed clutch, CL08-033. Pull out tray 3 and observe the tray 3 feed and nudger rolls. Press Start. The rolls rotate. Y↓N→Go to Flag 3. Check CL08-033. Refer to: • GP 12 How to Check a Solenoid or Clutch. • P/J4, HCF control PWB. • 01G +24V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • Tray 3 paper feed assembly, PL 8.32 Item 1. • HCF control PWB, PL 7.21 Item 2. Perform the following: • Clean the feed roll, nudger roll and retard roll using a cloth dampened with water. • Check the feed roll, nudger roll and retard roll for wear. If necessary install a new feed roll kit (W/TAG 151), PL 31.11.

← Xem tất cả mã lỗi Xerox WorkCentre 5765

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie