Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 08-132 — Xerox WorkCentre 5765

Code: 08-132

Description: Tray 3 Paper Feed Jam RAP (W/TAG 151) 08-132 The lead edge of the paper was late to the HCF exit sensor when feeding from tray 3.
Remedy: NOTE: The front door interlock must be cheated when checking +24V components. Enter dC330 code 08-108 HCF exit sensor, Q08-104. Press Start. Manually actuate the HCF exit sensor. The display changes. Y↓N→Go to Flag 1. Check Q08-108. Refer to: • GP 11 How to Check a Sensor. • P/J3, HCF control PWB. • 01E +5V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • HCF exit sensor, PL 8.33 Item 3. • HCF control PWB, PL 7.21 Item 2. Enter dC330 code 08-045 HCF transport motor, MOT08-045. Press Start. The motor runs. Y↓N→Go to Flag 2. Check MOT08-045. Refer to: • GP 10 How to Check a Motor. • P/J6, HCF control PWB. • 01G +24V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • HCF transport motor, PL 8.32 Item 10. • HCF control PWB, PL 7.21 Item 2. The transport rolls rotate. Y↓N→Check the following: •, drive belt, PL 8.36 Item 6. •, drive coupling, PL 8.36 Item 7. •, idler roll assembly, PL 8.36 Item 8. • Tray 3 and 4 transport roll, PL 8.32 Item 4 Perform the 08-103, 08-113 Tray 3 Misfeed RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5765

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie