Description: HVF Buffer Path RAP 11-164-171 The paper trailing edge is late leaving the buffer path sensor. 11-165-171 The paper leading edge is late arriving at the buffer path sensor.
Remedy: shows the location of the components. Enter dC330, code 11-164. Manually activate the buffer path sensor, Q11-164. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-164. Refer to: • GP 11 How to Check a Sensor. • P/J101, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Buffer path sensor, PL 11.156 Item 2. • HVF Control PWB, PL 11.157 Item 2. Enter dC330, code 11-079 to run the Buffer feed motor 1, MOT 11-079. The motor runs. Y↓N→Go to Flag 2. Check the entry feed motor 1, MOT 11-079. Refer to: • GP 10 How to Check a Motor. • P/J102, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Buffer feed motor, PL 11.150 Item 1. • HVF control PWB, PL 11.157 Item 2 Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.150 Item 9. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • Buffer path sensor, PL 11.156 Item 2. • Buffer feed motor, PL 11.150 Item 1. • HVF control PWB, PL 11.157 Item 2.