Description: Tri-Folder Exit Sensor and Assist Sensor RAP 11-185-171 The lead edge is late arriving at the folder exit sensor. 11-186-171 The trail edge is late leaving the folder exit sensor. 11-187-171 The lead edge is late arriving at the tri folder assist sensor.
Remedy: and show the location of the components. Enter dC330 code 11-184. Manually actuate the tri folder assist sensor, Q11-184. The display changes. Y↓N→Go to Flag 1 and Flag 2. Check the sensor, Q11-184. Refer to: • GP 11, How to Check a Sensor. • P/J604, P/J602, Tri Folder Control PWB • P/J563, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Tri folder assist gate sensor, PL 11.197 Item 6. • Tri-folder control PWB, PL 11.193 Item 16. • BM PWB, PL 11.166 Item 10. Enter dC330 code 11-185. Manually actuate the folder exit sensor. The display changes. Y↓N→Go to Flag 3 and Flag 4. Check the sensor, Q11-185. Refer to: • GP 11, How to Check a Sensor. • P/J604, P/J602, Tri Folder Control PWB. • P/J563, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Folder exit sensor, PL 11.197 Item 12. • Tri-folder control PWB, PL 11.193 Item 16. • BM PWB, PL 11.166 Item 10. Enter dC330 code 11-085 to energize the tri folder diverter solenoid, SOL 11-085. The solenoid energizes. Y↓N→Go to Flag 5 and Flag 6. Check the solenoid, SOL 11-085. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J602, P/J603, Tri Folder Control PWB. • P/J563, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Diverter solenoid, PL 11.197 Item 16. • Tri-folder control PWB, PL 11.193 Item 16. • BM PWB, PL 11.166 Item 10. Enter dC330 code 11-086 to energize the tri folder assist gate solenoid, SOL 11-086. The solenoid energizes. Y↓N→Go to Flag 7 and Flag 8. Check the solenoid, SOL 11-086. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J563, BM PWB. • P/J602, P/J603, Tri Folder Control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Tri-folder assist solenoid, PL 11.197 Item 8. • Tri-folder control PWB, PL 11.193 Item 16. • BM PWB, PL 11.166 Item 10. Enter dC330 code 11-087 to energize the drive clutch, CL 11-087. The clutch energizes. Y↓N→Go to Flag 9 and Flag 10. Check the clutch, CL 11-087. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J563, BM PWB. • P/J602, P/J603, Tri Folder Control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Drive clutch, PL 11.193 Item 9. • Tri-folder control PWB, PL 11.193 Item 16. • BM PWB, PL 11.166 Item 10. Enter dC330, code 11-062 to run the BM crease roll motor, MOT 11-062. The motor runs. Y↓N→Go to Flag 11. Check the motor, MOT 11-062. Refer to: • GP 10 How to Check a Motor. • P/J557, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • BM crease roll motor, PL 11.166 Item 8. • BM PWB, PL 11.166 Item 10. Perform SCP 6 Final Actions.