Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11-460-171 ... 11-462-171 — Xerox WorkCentre 5765

Code: 11-460-171 ... 11-462-171

Description: HVF Bin 1 Position RAP 11-460-171 Bin 1 motor has stalled. 11-461-171 Bin 1 did not actuate the bin 1 upper level sensor during stacking. 11-462-171 Bin 1 did not leave the bin 1 upper level sensor during stacking.
Remedy: NOTE: The bin 1 90% full sensor, Q11-331, and the bin 1 lower limit switch are mounted on the same bracket. This bracket can be in either of two positions. It is in the upper position, only when a tri-folder module is installed. NOTE: The bin 1 upper level sensor controls the height of the tray during normal use. The sensor is in two parts: the transmitter at the front of the tray and the receiver at the rear of the tray. Only the LED of the front sensor is used and only the light sensitive transistor of the rear sensor is used. Refer to Flag 3 and Flag 4. shows the location of the components. Place about one centimeter thickness of paper on the bin 1 tray. Switch off, then switch on the machine, GP 14. The bin 1 tray moves during initialization. Y↓N→If the tray is not at the upper limit, enter the dC330 code 11-334, bin 1 upper limit switch. Manually actuate the switch. The display changes. Y↓N→Go to Flag 5. Check the wiring and repair as necessary. Check the bin 1 upper limit switch, S11-334. Refer to: • GP 13 How to Check a Switch. • P/J602, HVF Control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Bin 1 upper limit switch, PL 11.135 Item 7. • HVF control PWB, PL 11.157 Item 2. If the tray is not at the lower limit, enter the dC330 code 11-335, bin 1 lower limit switch. Manually actuate the switch. The display changes. Y↓N→Go to Flag 6. Check the wiring and repair as necessary. Check the bin 1 lower limit switch, S11-335. Refer to: • GP 13 How to Check a Switch. • P/J602, HVF Control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Bin 1 lower limit switch, PL 11.135 Item 7. • HVF control PWB, PL 11.157 Item 2. Go to Flag 1. Check the wiring and repair as necessary. Check the bin 1 elevator motor, 11-030. Refer to: • GP 10 How to Check a Motor. • P/J202, HVF Control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Bin 1 elevator motor, PL 11.135 Item 10. • HVF control PWB, PL 11.157 Item 2. Enter the dC330 code, 11-182, bin 1 encoder sensor. Turn the bin 1 encoder wheel. The display changes. Y↓N→Go to Flag 2. Check the wiring and repair as necessary. Check the bin 1 encoder sensor, Q11-182. Refer to: • GP 11 How to Check a Sensor. • P/J601, HVF Control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Bin 1 encoder sensor, Q11-182, PL 11.135 Item 3. • HVF control PWB, PL 11.157 Item 2. Enter the dC330 code 11-332, bin 1 upper level sensor. Remove the paper from the tray. Actuate the sensor by breaking the light beam from the front transmitter to the rear receiver. The display changes. Y↓N→Go to Flag 3 and Flag 4. Check the wiring and repair as necessary. Check the two parts of the bin 1 upper level sensor, Q11-332. Refer to: • GP 11 How to Check a Sensor. • P/J601 and P/J901, HVF Control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Bin 1 upper level sensor (transmitter), PL 11.140 Item 20. • Bin 1 upper level sensor (receiver), PL 11.140 Item 16. • HVF control PWB, PL 11.157 Item 2. Enter the dC330 code 11-331, bin 1 90% full sensor. Actuate the sensor using a piece of paper. The display changes. Y↓N→Go to Flag 7. Check the wiring and repair as necessary. Check the bin 1 90% full sensor, Q11-331. Refer to: • GP 11 How to Check a Sensor. • P/J601, HVF Control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Bin1 90% full sensor, PL 11.135 Item 3. • HVF control PWB, PL 11.157 Item 2. Lower the bin 1 tray by pressing the PTU switch, or by entering the dC330 code 11-032, bin1 elevator motor down. Enter the dC330 code 11-196, bin 1 rear wall sensor. Actuate the bin 1 rear wall sensor using a sheet of paper. The display changes. Y↓N→Go to Flag 8. Check the wiring and repair as necessary. Check the bin 1 rear wall sensor, Q11-196. Refer to: • GP 11 How to Check a Sensor. • P/J403, HVF Control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Bin 1 rear wall sensor, PL 11.140 Item 17. • HVF control PWB, PL 11.157 Item 2. If the fault is random and Bin 1 has an erratic up / down movement and poor stacking. Check that the Bin 1 rear wall sensor is clean. The sensor is clean. Y↓N→Clean the Bin 1 rear wall sensor. Use a brush to remove paper dust from the sensor and the plastic surround. Then use a damp cloth to clean the sensor and plastic surround. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5765

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie