Description: 1K LCSS Poor Stacking RAP Use this RAP to find the cause of poor stacking in the 1K LCSS.
Remedy: Check the following; • Look for sets that are not dropping back fully in bin 1 and therefore not operating the bin 1 level sensors: – Large paper sizes should not be stacked on top of small paper sizes. – Ensure that the paper stack in each paper tray has been fanned. – Turn over the paper stack in each paper tray. – Ensure that all paper or other copy stock being used is within the size and weight specifications. Refer to GP 20 Paper and Media Size Specifications. – Try using a fresh ream of paper. – Ensure that the edge guides of all paper trays are adjusted correctly for the paper size and that the trays are fully closed. – Check that bin 1 is seated correctly and the bin 1 alignment clip is in position, PL 11.100 Item 13. • Labels must not be fed to bin 1, but to bin 0 only. • It is recommended that transparencies are fed to bin 0 whenever possible. • Check that bin 1 is level front to back, if necessary perform ADJ 11.1-120 1K LCSS Bin 1 Level. • Check that the bin 1 upper level sensor, Q11-332 is working correctly. Refer to the 11-030- 120, 11-334-120, 11-335-120, 11-336-120 Bin 1 Movement Failure RAP. • Check the operation of the front and rear tampers. Refer to 11-005-120, 11-006-120, 11- 310-120, 11-311-120 Front Tamper Move Failure RAP and 11-007-120, 11-008-120, 11- 312-120, 11-313-120, 11-319-120 Rear Tamper Move Failure RAP. • Check that the output device is not near an air conditioning or ventilation output duct. Air flow across the output bins can cause poor stacking. • Check if Mod. TAG L-013 LCSS bin 1 kit is installed on the finisher. – Machine that regularly process large stacks of A4/8.5x11 inch LEF paper should have the LCSS bin 1 W/TAG L-013 kit installed, PL 11.100 Item 10. – Machines that regular process small stacks of A4/8.5x11 inch LEF, A3/11x17 inch and A4/8.5x11 inch SEF paper should have the standard W/OTAG L-013 bin 1 installed, PL 11.100 Item 10. • Check the output copies for curl, refer to IQ5.