Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10-315, 10-320, 10-321, 10-323, 10-340, 10-350, 10-360, 10-365, 10-380 — Xerox WorkCentre 5775

Code: 10-315, 10-320, 10-321, 10-323, 10-340, 10-350, 10-360, 10-365, 10-380

Description: Fuser Over Temperature RAP 10-315 The difference between 2 consecutive thermistor readings exceeds a given value. 10-320 During standby or run mode, the thermistor reading is not within the target temperature range. 10-321 Over temperature during standby mode, the thermistor reading is not within the target temperature range 10-323 Over temperature during run mode, the thermistor reading is not within the target temperature range. 10-340 Fuser temperature sensor A reading monitors above its normal operating temperature. 10-350 The hardware comparator detects a fuser reading greater than 240 degrees centigrade or a short circuit thermistor. 10-360 Fuser temperature sensor B reading is greater than the normal operating temperature. 10-365 The fuser module is above the recommended operating temperature. 10-380 The fuser delta value between the temperature sensors A and B is to high.
Remedy: Switch off the machine, then switch on the machine, GP 14. The display shows Ready to Copy. Y↓N→Refer to. Go to Flag 1. The voltage at the temperature sensors A and B should be 2.9 volts when the sensors are cold. In standby mode the voltage should be 0.78 to 0.98 volts. Refer to: • P/J35, IOT PWB. • 01D +3.3 V Distribution RAP. • 01B 0V Distribution RAP Before new components are installed, restore the NVM values to default. Install new components as necessary: • Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. • LVPS and base module, PL 1.10 Item 3. • Fuser Module, (35-55 ppm) PL 10.8 Item 1, (65-90 ppm) PL 10.10 Item 1. Perform SCP 6 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5775

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie